This can work sometimes, and only if you use a heavy-duty (i.e. Some people suggest using a magnet to find the screws in your home’s studs. RELATED: 20 THINGS YOU SHOULD KNOW ABOUT YOUR HOME INSPECTION 2. It should only go in about half an inch if there’s a stud there. Mark where you think you’ve found the stud, and slowly hammer the nail into that area. Pro-Tip: Use a trim nail to double-check. If you notice they’re generally 16-24″-inches apart, then you’ve definitely found your marks. Try to find a few studs along the same wall and mark them as you go. Figuring out how to find a stud in a plaster wall this way takes some patience because the changes in density can be difficult to discern. Eventually, what you’ll hear instead is a high pitched sound reverberating off the studded post. Move horizontally along the wall (giving a couple of raps along the way) until that echo dissipates. You want to look out for a faint echo behind each knock. A simple double tab with your knuckle against a wall is enough to do the trick. This is the method you’ll find most professionals using to locate a stud in an old home. RELATED: ARE HOME INSPECTIONS WORTH THE COST? 1. With a couple of household items and a keen eye, you’ll be able to find your studs in minutes. So we have to find creative ways to figure out where these studs are. You can simply use a stud finder to find the perfect spot these days, but this won’t work reliably on older homes. Imagine hanging a 50 pound framed piece of artwork on nothing but drywall.Įnsuring your wall décor is anchored to these studs means they’ll stay in place until you decide to take them down again. Studs are the wooden or metal beams that support the walls in your house. This means that your standard stud finder won’t be able to detect a change in density because it’s all dense.Īnytime you want to hang something on your wall- whether it’s 0.5 pounds or 50 pounds- you want it to be attached to a stud. Vertical studs, wooden beams, and plaster make up the structure of older homes. Here are five ways to find a stud in a plaster wall: How To Find a Stud in a Plaster Wall But don’t worry- there are still ways to locate studs in these walls! So what’s the solution to finding studs in older homes? Some people say to use a magnet, but that also won’t work if you have metal lath. And if the lath is a metal wire type, instead of older wood lath, a stud finder will produce false readings. Plaster can be too thick or dense to find a stud with common stud finders, which is probably why you’re finding that these don’t work. These were “wet” applied walls (not to be confused with the similar-sounding “wet wall” that contains plumbing pipes). Learning how to find a stud in a plaster wall takes some patience, but we have a few tricks up our sleeve that will save you time.īack in the day, home builders had to trowel the wall finish on with plaster over a lath base (kind of like how stucco is applied). But on some older homes from the mid-1970s and prior, there’s a good chance you may have plaster walls instead. It’s pretty simple to find a stud in common drywall.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |